Jahongir
09.04.2008, 20:31
хоть кто-то нибуть работает с контроллерами? помогите начинающему, собрал программатор на at90s2313 схема платы (http://img.uz/images/866637flashed_LED.GIF) и схема (http://img.uz/images/91352gromov00.jpg) порта для подключение к компьютеру при компиляции всё нормально. вот код/************************************************** ***
This program was produced by the
CodeWizardAVR V1.25.9 Evaluation
Automatic Program Generator
© Copyright 1998-2008 Pavel Haiduc, HP InfoTech s.r.l.
http://www.hpinfotech.com
Project :
Version :
Date : 25.03.2008
Author : Freeware, for evaluation and non-commercial use only
Company :
Comments:
Chip type : AT90S2313
Clock frequency : 4.433619 MHz
Memory model : Tiny
External SRAM size : 0
Data Stack size : 32
************************************************** ***/
#include <90s2313.h>
#include <delay.h>
// Declare your global variables here
void main(void)
{
// Declare your local variables here
// Input/Output Ports initialization
// Port B initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTB=0x00;
DDRB=0x00;
// Port D initialization
// Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTD=0x00;
DDRD=0x00;
// Timer/Counter 0 initialization
// Clock source: System Clock
// Clock value: Timer 0 Stopped
TCCR0=0x00;
TCNT0=0x00;
// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer 1 Stopped
// Mode: Normal top=FFFFh
// OC1 output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer 1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x00;
TCNT1H=0x00;
TCNT1L=0x00;
OCR1H=0x00;
OCR1L=0x00;
// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
GIMSK=0x00;
MCUCR=0x00;
// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x00;
// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
while (1)
{
// Place your code here
PORTD.1=0;
delay_ms(1000);
PORTD.1=1;
delay_ms(1000);
};
}
:dash2: :dash2: :dash2: :dash2: :dash2: :dash2: :dash2: :dash2: :dash2: :dash2: :dash2: :dash2:
в коде цикл “while” открывает и закрывает 1й канал,
т.е получается мигалка, но программатор не работает(прошивается). при прошивание произошла ошибка (http://img.uz/images/667939123.JPG).
для программирования использую CodeVision.
This program was produced by the
CodeWizardAVR V1.25.9 Evaluation
Automatic Program Generator
© Copyright 1998-2008 Pavel Haiduc, HP InfoTech s.r.l.
http://www.hpinfotech.com
Project :
Version :
Date : 25.03.2008
Author : Freeware, for evaluation and non-commercial use only
Company :
Comments:
Chip type : AT90S2313
Clock frequency : 4.433619 MHz
Memory model : Tiny
External SRAM size : 0
Data Stack size : 32
************************************************** ***/
#include <90s2313.h>
#include <delay.h>
// Declare your global variables here
void main(void)
{
// Declare your local variables here
// Input/Output Ports initialization
// Port B initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTB=0x00;
DDRB=0x00;
// Port D initialization
// Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTD=0x00;
DDRD=0x00;
// Timer/Counter 0 initialization
// Clock source: System Clock
// Clock value: Timer 0 Stopped
TCCR0=0x00;
TCNT0=0x00;
// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer 1 Stopped
// Mode: Normal top=FFFFh
// OC1 output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer 1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x00;
TCNT1H=0x00;
TCNT1L=0x00;
OCR1H=0x00;
OCR1L=0x00;
// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
GIMSK=0x00;
MCUCR=0x00;
// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x00;
// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
while (1)
{
// Place your code here
PORTD.1=0;
delay_ms(1000);
PORTD.1=1;
delay_ms(1000);
};
}
:dash2: :dash2: :dash2: :dash2: :dash2: :dash2: :dash2: :dash2: :dash2: :dash2: :dash2: :dash2:
в коде цикл “while” открывает и закрывает 1й канал,
т.е получается мигалка, но программатор не работает(прошивается). при прошивание произошла ошибка (http://img.uz/images/667939123.JPG).
для программирования использую CodeVision.